Smoothing Profiling Tool for Granite – A50R25 Position 2
This CNC tool executes the granite smoothing by removing the slab’s roughness. Additionally, the A50R25 profiling tools for granite maintains the the geometry of the profile even on very hard materials such as granite. This result is due to the use of materials such as the steel core of the A50R25 Granite Smoothing tool. The electrolytic process that is used to to lay ther diamond powder also contributes to the results of the tool. It is very important that this tools is used before passing to the rectifying phase.
Main Characteristics
The characteristics of the A50R25 for smoothing granite are:
- Perfect Profile Geometry
- Long Life Abrasive Power
- Excellent Preparation for the Finishing Phase
The following tables provide you with the measurements of the A50R25 Granite Smoothing wheel and the specification of the granite profiling wheels wheels respectively.
A50R25 Specifications
| Max D | 114mm |  |
|---|---|---|
| Min D | 60mm | |
| Height | 60mm | |
| Rad | 25mm | |
| Bore | 35mm |
Granite Profiling Wheels
| Position | Stock Removal | Rotating Speed | Feed Rate mm/min | Feed Rate inch/min |
|---|---|---|---|---|
| 0G | 0 | 5500 RPM | 800-4000 mm/min | 32-160 inch/min |
| 1G |
0 |
5500 RPM | 800-5000 mm/min | 32-200 inch/min |
| 2MG | 0.019 inch (0.5 mm) | 5500 RPM | 800-4000 mm/min | 32-200 inch/min |
| EXC3 | 0.011 inch (0.3 mm) | 5500 RPM | 800-5000 mm/min | 32-200 inch/min |
| 4 | 0.003 inch (0.1 mm) | 3000 RPM | 600-5000 mm/min | 24-200 inch/min |
| 5 | 0.003 inch (0.1 mm) | 3000 RPM | 600-5000 mm/min | 24-200 inch/min |
| 6 | 0.0019 inch (0.05 mm) | 3000 RPM | 600-5000 mm/min | 24-200 inch/min |