Smoothing Profiling Tool for Marble/Granite – CD2S20 Position 2
This CNC tool executes the marble/granite smoothing by removing the slab’s roughness. Additionally, the CD2S20 profiling tools for marble/granite work on very hard materials such as granite or engineered stone. This result is due to the use of materials such as the steel core of the CD2S20 Marble/Granite Smoothing tool. The electrolytic process that is used to to lay ther diamond powder also contributes to the results of the tool. It is very important that this tools is used before passing to the rectifying phase.
Main Characteristics
The characteristics of the CD2S20 for smoothing marble/granite are:
- Perfect Profile Geometry
- Long Life Abrasive Power
- Excellent Preparation for the Finishing Phase
The following tables provide you with the measurements of the CD2S20 Marble/Granite Smoothing bit and the specification of the marble/granite profiling bits respectively.
| Max D | 33mm |  |
|---|---|---|
| Min D | 20mm | |
| SM | 3mm | |
| Position | Stock Removal | Rotating Speed | Feed Rate mm/min | Feed Rate inch/min |
|---|---|---|---|---|
| 0G | 0 | 5500 RPM | 800-4000 mm/min | 32-160 inch/min |
| 1G | 0 | 5500 RPM | 800-5000 mm/min | 32-200 inch/min |
| 2MG | 0.019 inch (0.5 mm) | 5500 RPM | 800-4000 mm/min | 32-200 inch/min |
| EXC3 | 0.011 inch (0.3 mm) | 5500 RPM | 800-5000 mm/min | 32-200 inch/min |
| 4 | 0.003 inch (0.1 mm) | 3000 RPM | 600-5000 mm/min | 24-200 inch/min |
| 5 | 0.003 inch (0.1 mm) | 3000 RPM | 600-5000 mm/min | 24-200 inch/min |
| 6 | 0.0019 inch (0.05 mm) | 3000 RPM | 600-5000 mm/min | 24-200 inch/min |