Marble/Granite CD30 Position 1 for Grinding
This CNC tool executes the marble/granite grinding to prepare the slab for the the following smoothing phase. This is due to the high performance in terms of cutting speed, and removal capacity supplied by the patented interchangeable sectors of the CD30 Position 1 Marble/Granite Grinding wheel.
The following tables provide you with the measurements of the CD30 Marble/Granite Grinding wheel and the specification of the marble/granite profiling wheels respectively.
CD30 Specifications
| Max D | 20mm |  |
|---|---|---|
| Min D | 20mm | |
Marble/Granite Profiling Bits
| Position | Stock Removal | Rotating Speed | Feed Rate mm/min | Feed Rate inch/min |
|---|---|---|---|---|
| 0G | 0 | 5500 RPM | 800-4000 mm/min | 32-160 inch/min |
| 1G | 0 | 5500 RPM | 800-5000 mm/min | 32-200 inch/min |
| 2MG | 0.019 inch (0.5 mm) | 5500 RPM | 800-4000 mm/min | 32-200 inch/min |
| EXC3 | 0.011 inch (0.3 mm) | 5500 RPM | 800-5000 mm/min | 32-200 inch/min |
| 4 | 0.003 inch (0.1 mm) | 3000 RPM | 600-5000 mm/min | 24-200 inch/min |
| 5 | 0.003 inch (0.1 mm) | 3000 RPM | 600-5000 mm/min | 24-200 inch/min |
| 6 | 0.0019 inch (0.05 mm) | 3000 RPM | 600-5000 mm/min | 24-200 inch/min |
Other Items:
N 30 Position 2 Granite Profiling Wheel
A 30 R15 Oma Polisher
A 40 R10 Position 3 Granite Profiling Wheel
B 40 Position 5 Granite Profiling Wheel
M 30 Position 2 Granite Profiling Wheel
FCD 20 Position 5 Granite Profiling Wheel
D 30 Position 2 Granite Profiling Wheel
Q 30 Position 4 Granite Profiling Wheel