Smoothing Profiling Tool for Granite – E2030 Position 2
This CNC tool executes the granite smoothing by removing the slab’s roughness. Additionally, the E2030 profiling tools for granite maintains the the geometry of the profile even on very hard materials such as granite. This result is due to the use of materials such as the steel core of the E2030 Granite Smoothing tool. The electrolytic process that is used to to lay ther diamond powder also contributes to the results of the tool. It is very important that this tools is used before passing to the rectifying phase.
Main Characteristics
The characteristics of the E2030 for smoothing granite are:
- Perfect Profile Geometry
- Long Life Abrasive Power
- Excellent Preparation for the Finishing Phase
The following tables provide you with the measurements of the E2030 Granite Smoothing wheel and the specification of the granite profiling wheels wheels respectively.
E2030 Specifications
| Max D | 94mm |  |
|---|---|---|
| Min D | 60mm | |
| Height | 42mm | |
| Rad | 2mm | |
| Bore | 35mm |
Granite Profiling Wheels
| Position | Stock Removal | Rotating Speed | Feed Rate mm/min | Feed Rate inch/min |
|---|---|---|---|---|
| 0G | 0 | 5500 RPM | 800-4000 mm/min | 32-160 inch/min |
| 1G |
0 |
5500 RPM | 800-5000 mm/min | 32-200 inch/min |
| 2MG | 0.019 inch (0.5 mm) | 5500 RPM | 800-4000 mm/min | 32-200 inch/min |
| EXC3 | 0.011 inch (0.3 mm) | 5500 RPM | 800-5000 mm/min | 32-200 inch/min |
| 4 | 0.003 inch (0.1 mm) | 3000 RPM | 600-5000 mm/min | 24-200 inch/min |
| 5 | 0.003 inch (0.1 mm) | 3000 RPM | 600-5000 mm/min | 24-200 inch/min |
| 6 | 0.0019 inch (0.05 mm) | 3000 RPM | 600-5000 mm/min | 24-200 inch/min |