Slab Smoothing Tool for Granite Profile H30 (Position 2)

Smoothing Profiling Tool for Granite – H30 Position 2

This CNC tool executes the granite smoothing by removing the slab’s roughness. Additionally, the H30 profiling tools for granite maintains the the geometry of the profile even on very hard materials such as granite. This result is due to the use of materials such as the steel core of the H30 Granite Smoothing tool. The electrolytic process that is used to to lay ther diamond powder also contributes to the results of the tool. It is very important that this tools is used before passing to the rectifying phase.

Main Characteristics

The characteristics of the H30 for smoothing granite are:

Perfect Profile Geometry
Long Life Abrasive Power
Excellent Preparation for the Finishing Phase

The following tables provide you with the measurements of the H30 Granite Smoothing wheel and the specification of the granite profiling wheels wheels respectively.

H30 Specifications

Max D	100mm
Min D	60mm
Height	42mm
Rad A	20mm
Rad B	2mm
Bore	35mm

Granite Profiling Wheels

Position	Stock Removal	Rotating Speed	Feed Rate mm/min	Feed Rate inch/min
0G	0	5500 RPM	800-4000 mm/min	32-160 inch/min
1G	0	5500 RPM	800-5000 mm/min	32-200 inch/min
2MG	0.019 inch (0.5 mm)	5500 RPM	800-4000 mm/min	32-200 inch/min
EXC3	0.011 inch (0.3 mm)	5500 RPM	800-5000 mm/min	32-200 inch/min
4	0.003 inch (0.1 mm)	3000 RPM	600-5000 mm/min	24-200 inch/min
5	0.003 inch (0.1 mm)	3000 RPM	600-5000 mm/min	24-200 inch/min
6	0.0019 inch (0.05 mm)	3000 RPM	600-5000 mm/min	24-200 inch/min